Engine Rebuilding Course: Entry Level
Course times: 12pm - 5pm
Saturday for 4 weeks
This class focuses on the engine only and is a demonstration on how to properly disassemble, organize and inspect the internal engine components for rebuilding. This is brought about due to undesirable engine operating characteristics such as blue smoke, low power, rough idle or in the extreme engine knock or seizure. Any engine can be rebuilt but this is an extremely costly procedure at a dealer ($2,500-$6.000) and the dealer rarely does any of the work themselves. They pull the engine and take it to a machine shop to have it rebuilt. They then install the rebuilt engine back in the bike and add up to $1,500 to the machine shops charges.
When you know how to tear down the engine yourself tho you can save even more. An engine can in some instances be rebuilt for as little as $300. Most rebuilds entail refurbishing the top end of the engine (cylinders, rings, pistons and valves) rarely does it get into the bottom end (tho bottom end will be covered as well). In this class we will tear down at least two engines and you will observe and participate in removing cam chains, cams, heads, pulling cylinders and pistons. You will learn how to organize and "kit" the parts for the machine shop. You will learn how to do inspections and measurements to determine if excessive wear has occurred and if the parts are out of specification. We will make a field trip to a local machine shop to see the back end process of boring out cylinders, decking heads and cases, you will learn how to grind valves and seats. The whole process will make sense to you and you will make a new life long friend with the machine shop, who for $40 per hour can make amazing things for you and bring back engines from the dead.
How can this serve you? For starters you can be buy certain bikes which would scare the hell out of anyone else for next to nothing. I bought a 2004 Ducati Super Sport 750 for $500 because it had a blown engine. I rebuilt the engine myself for about $400 (top end Ducati part are expensive). I bought an '06 Honda CBR1000 that was dropped in an accident and the body damage was light but the engine case was punctured. The replacement case from Honda was $3600 plus another $2,220 labor to replace it. The owner bought a new bike and sold me this one for $600. I bought a good used case on Ebay for $300 and took the engine apart over two days. Had it riding in less than a week for under $400. This was fun to boot because of the excitement of getting this bike going. This was at the time a $6000 bike. Even if it takes you many weeks to complete there is still this sense of satisfaction and accomplishment that stills thrills me to this day.
You will also learn about how to restore the appearance of the engine. Once you have it out why not shine up those Aluminum valve and side covers. I will show you how to make the nastiest covers shine like mirrors and add $$$$ to the value of the project. You will learn about chrome plating and painting techniques to make it look like new.
I will provide tools and engines or you could bring one of your own bike engines.
We will meet for 4 successive Saturdays. The tuition is $300 and the class will meet from 12:00pm to 5:00pm . Space is limited for this class so don't wait until the last minute to register.
Registration: There is very limited seating for this class so you must register in advance to reserve a seat. Refunds for a class once you are registered are only possible if you notify us at least 2 weeks before the classes starts. After that time window there are no refunds but you can attend the class at a future date when your schedule permits.